VAG 1.0 TSI Induction Kit

The VAG 1.0 TSI Induction Kit is a vehicle-specific upgrade from Forge Motorsport, developed to improve the engine's intake path while retaining a vehicle-specific, properly engineered installation. This listing is intended for A1, Golf, Polo and T-Cross 8X, MK7, MK7.5 and MK5 applications; check the fitment and technical notes below before ordering.

Rather than using generic application text, the specification below is based on the manufacturer information supplied for this product. Where engine codes, model years, factory equipment or tuning requirements are stated, these should be treated as part of the fitment requirements.

Vehicle fitment

• Make: Audi and Volkswagen
• Model: A1, Golf, Polo, T-Cross and T-Roc
• Chassis / variant: 8X, MK7, MK7.5, MK5, 6C and MK6

Product details

• Lifetime warranty*
• Washable and reusable design
• Gains of 5 bhp and 6lb/ft torque
• Designed and manufactured in Great Britain
• Improvement in engine power and torque
• Designed to flow stronger for longer
• Fitting is straightforward and can be completed in 20-30 minutes
• No cutting or modification to the vehicle, allowing it to be reversed back to stock

FMINDK39 is the market leading induction kit for the VAG 1.0 TSI. Our induction kit is an evolution of the FMINDK30 used for the VW UP! GTI. There are two key changes from that kit; the main and most important change is the incorporation of the OEM air duct which allows the kit to fit up to the original cold air ducting. The second alteration is the inclusion of a lid to the heat shield which has been selected to retain as much of the cold air flowing into the airbox as possible.

⭐ Great sounding modification and makes your engine bay look 10x better ⭐

After time spent on the dyno, we achieved gains of 5 bhp and 6lbft torque throughout the rev range which is extremely pleasing results not to mention the improved sound track our intake gives this punchy little 1.0 litre engine - higher gains can be expected from mapped cars.

The Forge silicone hose has a larger bore and smooth finish inside giving optimum flow and comes in a choice of three colours: black, red, or grey. The construction of this hose has been engineered to exceed that of the OEM fitments and will enhance any car engine bay both technically and aesthetically.

Why not add gold tape to the underside of the aluminium housing to further reflect any heat soak from the engine. The gold tape comes on a 5 metre roll allowing you to apply it to the underside of your Forge intake.

REPLACEMENT AIR FILTERS CAN BE FOUND ON OUR WEBSITE: THE FOAM OPTION IS PART NUMBER: FMAF8, THE PLEATED OPTION IS: FMFILPLE021

Vehicle compatibility

• Make: Audi and Volkswagen
• Model: A1, Golf, Polo, T-Cross, and T-Roc
• Chassis / generation: 8X, MK7, MK7.5, MK5, 6C, and MK6

Ordering & fitment

Please use the vehicle application, engine code and specification information above to confirm compatibility. If your vehicle has been modified or differs from the stated application, confirm fitment before ordering.

We understand it can be a bit confusing to figure out if a part will work for your car. No worries! Just shoot us a message with your question, and our friendly sales team will then be in touch to confirm if this part is the correct for your vehicle!

Disclaimer:

Products sold by Nineteen72 Performance are exclusively designed for off-road or sanctioned competition use. Any use on public roads is strictly prohibited and may violate local, state, and federal laws. Nineteen72 Performance does not confirm the legality of road use; it is the consumer's responsibility to comply with applicable laws. Use of these products for any purpose other than intended is at the user's own risk. Nineteen72 Performance is not liable for misuse or non-compliance.

Warranty:

At Nineteen72 Performance, we proudly back every product in our store, ensuring that each item comes with a comprehensive warranty.

All components crafted by our esteemed third-party partners in the store are accompanied by a minimum one-year manufacturer's warranty. Our warranty terms are uniform across all products, providing coverage for any manufacturing defects that may arise over time, excluding typical wear and tear. Your satisfaction and product durability are our top priorities.

Shipping & Returns:

At Nineteen72 Performance we offer worldwide shipping.

14-Day Easy Returns at Nineteen72 Performance

Love what you bought from Nineteen72 Performance? Great! If not, no worries. Enjoy a hassle-free 14-day return window. Just ensure your items are unused and in their original condition. For returns, contact us at Returns@Nineteen72Performance.co.uk. Your satisfaction drives us.

Klarna
Offers a number of options at checkout including: Pay Later (delay payment by up to 30 days, interest free); Split Payments (split payments in 3 up to 3 months, interest free); Installments (split payments up to 6 months interest-free, up to 24 months interest bearing). Maximum purchase £1,500.

0% Interest is available. Select 'Klarna' at checkout.