MMX Performance - RP650 Fast road pad upgrade front | BMW F8x | F2x | F3x
Tax included. Shipping calculated at checkout
When it comes to high-performance driving, we all know that braking performance is just as important as acceleration and cornering. So to gain performance from your factory BMW M2, M2C, M3 or M4's brakes, our RP650 Front Brake Pads are an essential upgrade. Through extensive testing on road and track, the result is an advanced ECE-90 approved high friction material that delivers near-zero brake fade under high temperature use, yet doesn’t requiring a warmup period. In other words, a dramatic improvement in the braking department that still works perfectly in day-to-day driving duties.
Drive your M-car hard and the chances are you’ve experienced brake fade at some point. That’s where our High Performance RP650 Brake Pads come in. A simple replacement for your factory pads using the standard braking hardware, they deliver a much higher resistance to high temperature fade. This makes them perfect for fast road driving and even occasional track day use, yet without any compromise in daily driving.
A lot of our compound testing focussed on developing a pad that finds that sweet-spot between excellent cold bite and high temperature fade resistance. The result is a medium aramid fibre compound with friction coefficient of 0.42mu in the temperature range of 450 – 650°C.
This compound is the secret to how our high-performance RP650 brake pads provide superior stopping power and reliable performance under even the most demanding conditions yet without requiring a warmup period - essential for cars that have to perform perfectly in daily driving duties yet stand up to the demands of fast road and occasional track use.
As well as outright performance, another key development focus has been around perfecting pedal feel - resulting in progressive braking with unparalleled pedal response underfoot. The slotted and chamfered construction ensures quiet and smooth braking.
Meanwhile, our RP650 brake pads are designed to last longer than traditional brake pads, reducing the need for frequent replacements - even saving you money in the long run. This also means that the pads produce less dust than traditional brake pads, keeping your wheels cleaner and reducing the need for frequent cleaning.
Finally, it’s a legal requirement in most countries for brake pads to carry ECE-R90 certification – yet many other aftermarket pads do not. Not only is this ECE-R90 standard essential for legality (and potentially your insurance validity), this regulation gives you the peace of mind that the pads are tested and approved for cold performance, speed, sensitivity, friction behaviour, compressibility, shear and hardness. So, the pads will work just as well when cold as when up to full track temperatures.
Please note: if you are more serious about your track performance, we also offer the MMR Performance Track Pads (for the same car applications). These track pads are ideal for those who prioritise the ultimate track-day performance over all else, and are happy to accept less cold-temperature performance and don’t require the ECE-90 road approval.
Available separately as sets of four front pads or rear pads. Please ensure you select which set you require at point of order. Ideally we’d recommend replacing front and rear sets together.
Part number for matched RP650 rear pads: MMR27-0501R
SPECIFICATION SUMMARY:
-
Perfect for fast road use
-
Public highway legal – R90 Approved
-
Works from cold – excellent cold bite and high temperature fade resistance
-
Suitable for short use track days
-
Due to bedding in material – bedding in happens naturally over the first 100-200 miles in urban driving
-
Quiet and smooth braking / shimmed / slotted / chamfered construction
-
Responsive pedal feel for progressive braking
Fitment Details:
|
Only suitable for BMW F-Series with M Sport Performance Brakes (blue calipers) with manual handbrake/parking brake. Sold separately as car axle-sets of four Front Pads or four Rear Pads. Ideally we’d recommend replacing front and rear sets together rather than mixing brands / compounds between front and rear. Matched rear RP650 pads: MMR27-0501R Key models:
|
Fitting Information:
Bedding in: after completing installation, make a series of 10 stops from 60mph (100kph) to 5-10mph (10-15kph). At the end of each stop, immediately accelerate back up to around 60mph (100kph) again for the next stop (the exact speed is not critical).
As you decrease to around 5-10 MPH (10-15kph), it is not necessary to watch the speedometer, keep your eyes on the road and approximate your speed at the end of each cycle. Do not come to a complete stop, as you will imprint pad material onto the disc, risking a vibration.
On the 8th or 9th stop, there should be a distinct smell from the brakes. Smoke may be evident after several stops as well. Also, by the 8th or 9th stop, some friction materials will experience “green fade”. This is a slight fading of the brakes. The fade will stabilize, but not completely go away until the brakes have cooled.
We understand it can be a bit confusing to figure out if a part will work for your car. No worries! Just shoot us a message with your question, and our friendly sales team will then be in touch to confirm if this part is the correct for your vehicle!
Disclaimer:
Products sold by Nineteen72 Performance are exclusively designed for off-road or sanctioned competition use. Any use on public roads is strictly prohibited and may violate local, state, and federal laws. Nineteen72 Performance does not confirm the legality of road use; it is the consumer's responsibility to comply with applicable laws. Use of these products for any purpose other than intended is at the user's own risk. Nineteen72 Performance is not liable for misuse or non-compliance.
Warranty:
At Nineteen72 Performance, we proudly back every product in our store, ensuring that each item comes with a comprehensive warranty.
All components crafted by our esteemed third-party partners in the store are accompanied by a minimum one-year manufacturer's warranty. Our warranty terms are uniform across all products, providing coverage for any manufacturing defects that may arise over time, excluding typical wear and tear. Your satisfaction and product durability are our top priorities.
Shipping & Returns:
At Nineteen72 Performance we offer worldwide shipping.
14-Day Easy Returns at Nineteen72 Performance
Love what you bought from Nineteen72 Performance? Great! If not, no worries. Enjoy a hassle-free 14-day return window. Just ensure your items are unused and in their original condition. For returns, contact us at Returns@Nineteen72Performance.co.uk. Your satisfaction drives us.
Klarna
Offers a number of options at checkout including: Pay Later (delay payment by up to 30 days, interest free); Split Payments (split payments in 3 up to 3 months, interest free); Installments (split payments up to 6 months interest-free, up to 24 months interest bearing). Maximum purchase £1,500.
0% Interest is available. Select 'Klarna' at checkout.
