Induction Kit for VW Transporter T5-T6.1 2.0 TSI/TDI & 1.9/2.5 TDI

The Induction Kit for VW Transporter T5-T6.1 2.0 TSI/TDI & 1.9/2.5 TDI is a vehicle-specific upgrade from Forge Motorsport, developed to improve the engine's intake path while retaining a vehicle-specific, properly engineered installation. This listing is intended for T5 and T6 applications; check the fitment and technical notes below before ordering.

Rather than using generic application text, the specification below is based on the manufacturer information supplied for this product. Where engine codes, model years, factory equipment or tuning requirements are stated, these should be treated as part of the fitment requirements.

Vehicle fitment

• Make: Volkswagen
• Model: T5 and T6

Product details

Highlights:

• Fits all Transporters from 2003-2024 (see exclusions below)
• Increased air flow
• Gains of up to 13BHP
• Increased acoustic noise
• Easy fit
• Picks up from OEM inlet ducting
• Increased surface area of filter

This part replaces OEM 7E0129601 / 7HO129601 / 7LA129601

FMINDK48 is the Forge Motorsport intake solution for VW T5/T5.1/T6 and T6.1. Yes, this beautifully crafted induction kit fits most Transporters from 2003-2024!

This intake will not fit the T6-BI-TURBO with the MAF sensor of 90mm.

It has been designed and engineered to directly replace the stock airbox lid and offers a high-quality replacement, with its open top design which not only looks aesthetically pleasing but is designed to increase the airflow and performance of your vehicle. By neatly clipping into the airbox, this Forge Motorsport induction kit design ensures that it is not a 'hot air filter', allowing your Transporter to breathe better therefore improving performance.

During the development phase we found that the opening on the top and slots on the side of the intake helped mapped vehicles, while not causing detriment to standard tune vehicles.

As with all of our testing we use independent tuners; in this instance we used Avon Tuning in Bristol. From the results we proved some great additional performance gains, as you can see from the dyno graphs below. Peak power with a tuning box installed gave peak gains of 12.5 BHP with gains of also 20NM of Torque, most impressively though are the mid range power improvements. Typically this is where the driver will really feel a great improvement in acceleration, as well as far supplier towing power. This can be ideal for heavier transporters typically with camper conversions.

The first dyno pictured show the improvements on a 100% stock ECU while the second dyno shows the increases with a tuning box installed. The third dyno graph we have highlights where the maximum gains are in the rev range. Dyno 3 shows a huge 23 BHP increase @3700 rpm with a gain of 44nm @3600RPM!

Our intakes are designed to the highest quality with UK manufactured sheet metal and a high quality Pipercross air filter to significantly increase surface area allowing a greater airflow. FMINDK48 was designed to increase throttle response, improve performance, and make a far better sound, all of which improve the driving experience.

We understand it can be a bit confusing to figure out if a part will work for your car. No worries! Just shoot us a message with your question, and our friendly sales team will then be in touch to confirm if this part is the correct for your vehicle!

Disclaimer:

Products sold by Nineteen72 Performance are exclusively designed for off-road or sanctioned competition use. Any use on public roads is strictly prohibited and may violate local, state, and federal laws. Nineteen72 Performance does not confirm the legality of road use; it is the consumer's responsibility to comply with applicable laws. Use of these products for any purpose other than intended is at the user's own risk. Nineteen72 Performance is not liable for misuse or non-compliance.

Warranty:

At Nineteen72 Performance, we proudly back every product in our store, ensuring that each item comes with a comprehensive warranty.

All components crafted by our esteemed third-party partners in the store are accompanied by a minimum one-year manufacturer's warranty. Our warranty terms are uniform across all products, providing coverage for any manufacturing defects that may arise over time, excluding typical wear and tear. Your satisfaction and product durability are our top priorities.

Shipping & Returns:

At Nineteen72 Performance we offer worldwide shipping.

14-Day Easy Returns at Nineteen72 Performance

Love what you bought from Nineteen72 Performance? Great! If not, no worries. Enjoy a hassle-free 14-day return window. Just ensure your items are unused and in their original condition. For returns, contact us at Returns@Nineteen72Performance.co.uk. Your satisfaction drives us.

Klarna
Offers a number of options at checkout including: Pay Later (delay payment by up to 30 days, interest free); Split Payments (split payments in 3 up to 3 months, interest free); Installments (split payments up to 6 months interest-free, up to 24 months interest bearing). Maximum purchase £1,500.

0% Interest is available. Select 'Klarna' at checkout.