Carbon Fibre Induction Kit for Volkswagen, Audi, Seat, Skoda, Cupra 2.0 TSI EA888

The Carbon Fibre Induction Kit for Volkswagen, Audi, Seat, Skoda, Cupra 2.0 TSI EA888 is a vehicle-specific upgrade from Forge Motorsport, developed to improve the engine's intake path while retaining a vehicle-specific, properly engineered installation. This listing is intended for S3, Golf R, TT and Golf GTI 8V, MK7, MK2 and MK7.5 applications; check the fitment and technical notes below before ordering.

Rather than using generic application text, the specification below is based on the manufacturer information supplied for this product. Where engine codes, model years, factory equipment or tuning requirements are stated, these should be treated as part of the fitment requirements.

Vehicle fitment

• Make: Audi and Volkswagen
• Model: S3, Golf R, TT, Golf GTI, Golf, Arteon, T-Roc, Passat, A3, Tiguan, TTS and Arteon R
• Chassis / variant: 8V, MK7, MK2, MK7.5, MK8, 8Y, 8S and MK3

Product details

• Average gains of 5.5bhp
• Gains of 16bhp at peak and average of 10bhp from 4500rpm when coupled with FMTIA5/9
• Average gain of 20NM of torque
• Prepreg 2x2 twill formed carbon fibre
• Dyno proven
• Great induction noise
• More responsive throttle
• Lifetime Warranty

With the release of the VW Golf MK8 R, the development team at Forge Motorsport knew that there would be a great opportunity to help the EA888 engine breathe easier and make more power. We were lucky to get one of the first MK8R’s to enter the UK and used this opportunity to put months of development and testing into this new induction kit. Our MK8 Golf R has been put through countless hours of track day work and hill climbs, alongside the usual daily and spirited driving. This kit has been designed from the ground up, using 3D Scanning, FEA Simulation data in SolidWorks CAD, 3D printed development, and numerous dyno sessions to truly unlock the power.

Simulation testing played a large part in the design process to help maximise the airflow. This included a tear drop cavity around the bonnet release mechanism to ensure that the airflow stays fast and laminar on its way to the filter element. The 3D printed prototypes helped with comparing our simulation testing to real world driving conditions. This is a valuable comparison that is used in the top tiers of motorsport, now being brought to your vehicle.

During the final prototypes testing we found that the Forge induction kit with stock turbo inlet produced gains on average of 5.5BHP. However, when paired with our Turbo Inlet Adaptor FMTIA5/9 this is where the stock EA888 engine saw impressive gains, increasing power up to 16BHP at 6500RPM with a significant average power increase from 4500RPM to the 6700RPM Rev limit of 10BHP, while the drivability and the punch from extra torque increases can be felt on the road as between 4000RPM to the rev limit an average gain of 20NM is achieved. It’s worth remembering that this is with a stock ECU and no tune, so we would expect to see mapped cars returning even greater yields of power.

This induction kit runs the full width of the slam panel, incorporating an elegant lip which neatly slides under the slam panel to ensure that all the cold air from the front of the vehicle flows through into the inlet tract with no detriment from the engines heat. During testing we found this to make a significant increase to airflow

Vehicle compatibility

• Make: Audi and Volkswagen
• Model: S3, Golf R, TT, Golf GTI, Golf, Arteon, T-Roc, Passat, A3, Tiguan, TTS, and Arteon R
• Chassis / generation: 8V, MK7, MK2, MK7.5, MK8, 8Y, 8S, and MK3

Ordering & fitment

Please use the vehicle application, engine code and specification information above to confirm compatibility. If your vehicle has been modified or differs from the stated application, confirm fitment before ordering.

We understand it can be a bit confusing to figure out if a part will work for your car. No worries! Just shoot us a message with your question, and our friendly sales team will then be in touch to confirm if this part is the correct for your vehicle!

Disclaimer:

Products sold by Nineteen72 Performance are exclusively designed for off-road or sanctioned competition use. Any use on public roads is strictly prohibited and may violate local, state, and federal laws. Nineteen72 Performance does not confirm the legality of road use; it is the consumer's responsibility to comply with applicable laws. Use of these products for any purpose other than intended is at the user's own risk. Nineteen72 Performance is not liable for misuse or non-compliance.

Warranty:

At Nineteen72 Performance, we proudly back every product in our store, ensuring that each item comes with a comprehensive warranty.

All components crafted by our esteemed third-party partners in the store are accompanied by a minimum one-year manufacturer's warranty. Our warranty terms are uniform across all products, providing coverage for any manufacturing defects that may arise over time, excluding typical wear and tear. Your satisfaction and product durability are our top priorities.

Shipping & Returns:

At Nineteen72 Performance we offer worldwide shipping.

14-Day Easy Returns at Nineteen72 Performance

Love what you bought from Nineteen72 Performance? Great! If not, no worries. Enjoy a hassle-free 14-day return window. Just ensure your items are unused and in their original condition. For returns, contact us at Returns@Nineteen72Performance.co.uk. Your satisfaction drives us.

Klarna
Offers a number of options at checkout including: Pay Later (delay payment by up to 30 days, interest free); Split Payments (split payments in 3 up to 3 months, interest free); Installments (split payments up to 6 months interest-free, up to 24 months interest bearing). Maximum purchase £1,500.

0% Interest is available. Select 'Klarna' at checkout.